Your desk. Your style.

• The 110×160 mm print area is a design reference.
• Check the actual cover size and UV adhesion on a physical sample.
• Choose the box using the complete physical set.
• Do not place the Control Print logo or wordmark on the products. Only merch ornaments may be used on products. Use the logo on packaging only.

• Main cover: Matte burnt-orange base, cobalt Bézier motif with control points in the upper part and the name Areg lower down. Keep artwork centred and off the spine and edges.
• Three cover styles: BEZIER: a creative curve and nodes. GRID: a simple geometric grid. INITIAL: an original composition with the first letter of the name. Use the same approved print area for all.
• Proposed print area: 110×160 mm is a project limit only. On a nominal 148×210 mm A5 reference, centre is x=74, y=105 mm and top-left x=19, y=25 mm. Measure the real cover: an A5 inner block does not guarantee an A5 cover.
• Name rule: Use one line for a short name; use two lines or INITIAL for a long name. Approve sizes in actual print and do not permit unlimited automatic shrinking.
• Coordination: Repeat the same symbol and colour on bookmark and card. Use the approved CP-STK-001 sticker master, not a newly designed set.
• Brand layer: Use the supplied correct logo without changing its shape or colours. Apply the merch’s orange circles, semicircles and thin lines as a restrained packaging accent.

• Notebook: Use one ready-made model, initially in one cover colour. Squared, ruled or blank inner pages depend on availability of the same external model. Do not fix page count, paper or cover coating before choosing the supplier’s item.
• UV print: Test the actual cover stock with a suitable UV process. The operator approves whether a WHITE layer is needed, its order and density. Do not assume white ink is always required.
• Jig: Make a positioning jig for the real notebook that holds the cover flat and keeps the spine and elastic away from the print zone.
• Bookmark and card: Suggested bookmark stock: about 300–350 gsm; card: about 250–300 gsm. Leave the writing area on the back unlaminated. Final stock depends on print and finishing requirements.

• Box: Ready-made kraft mailer. Proposed initial inner dimensions: length 230 × width 175 × height 35 mm. Choose or buy only after a full physical-set fit test. External dimensions differ.
• Stack layout: Protective paper below, then notebook. Stack the three A6 sticker sheets and bookmark on top, separated by paper; card above them. No foam, magnetic closure or individual compartments.
• Band: Proposed width: 60 mm. Length = 2×(external box width + external box height) + 20 mm overlap. Example: external width 181 and height 40 mm gives 462 mm. Always remeasure.
• Fast alternative: If a long printed band is inconvenient, use coloured stock paper plus a small front label, or one 100×70 mm label without a band. Compare active assembly minutes.
• Copy: Outside: official logo, “Your desk. Your style.” and a small “For you: Areg” field. Contents card: “1 notebook, 12 stickers on 3 sheets, 1 bookmark, 1 card”.
• Card draft: Front: “For you”. Back: “For your new ideas.” with space for a handwritten message. No unsupported premium-finishing claims.

• Choose and measure the notebook: cover width, height and thickness, elastic, spine and rounded corners.
• Approve UV adhesion, colour, rub resistance and cover opening on a sample.
• Approve one jig and one variable-personalisation field.
• Produce the three sticker sheets in the shared batch and the bookmark and card in the same paper job.
• Stack the contents, check movement and quantities, and close the standard box.

• The name is correct and consistent on the cover, bookmark and packaging.
• Print stays off the spine and elastic and is not damaged when the cover opens.
• Check print adhesion and dry rubbing with the same sample procedure.
• Inside: one notebook, 12 stickers, one bookmark and one card.
• The closed box prevents movement and crushing; paper does not scratch the UV print.

• 3 cover masters: BEZIER / GRID / INITIAL in one print area
• 110×160 mm reference zone plus measured drawing of the real item
• Two-sided 45×140 mm bookmark and two-sided single-sheet A6 card
• Parametric box-band reference and 100×70 mm front-label alternative
• UV PRINT file, WHITE layer if required and jig-positioning reference
• Web images: full contents, cover close-up, inner pages, open and closed box

The set is designed to stack. Do not design a large box to place an A5 notebook and A6 sheets side by side. The open-pages inset in the generated image is a detail of the same notebook, not a second included item.

Basic: notebook. Extended: notebook + 12 stickers + bookmark. Gift: the same plus A6 card and box. Make added contents clear, confirm prices after costing and do not invent discounts.